Material info
Properties:
• Strength: Medium — rigid but can be brittle under impact
• Flexibility: Low — snaps rather than bends
• Heat Resistance: Low — softens around 55-60°C
• UV Resistance: Poor — not suited for prolonged outdoor use
• Layer Adhesion: Excellent — strong, clean layer bonding
• Surface Finish: Excellent — smooth, glossy finish out of the box
• Odour: Very low — faint sweet smell
Best for:
• Prototyping and concept models
• Decorative items, figurines, and cosplay props
• Desk organisers, phone stands, and household items
• Educational projects and classroom use
• Architectural models and display pieces
Not ideal for:
• Parts exposed to heat (car interiors, near electronics)
• Mechanical parts under repeated stress
• Outdoor items in direct sunlight
Print settings
| Nozzle temperature | 200-215°C |
|---|---|
| Bed temperature | 55°C (heated bed optional) |
| Print speed | 50-60 mm/s |
| Cooling fan | 100% from layer 2 |
| Retraction | 5mm @ 40mm/s (Bowden) / 1-2mm (direct drive) |
| Flow rate | 100% |
| Layer height | 0.16-0.28mm |
Prints well in open air — no enclosure required. Clean the build plate with isopropyl alcohol for best adhesion.