Material info
Properties:
• Optical Clarity: Good — true translucency with proper settings
• Flexibility: High — same as standard 95A
• Strength: Excellent
• Impact Resistance: Outstanding
• Heat Resistance: Moderate — up to ~80°C
• Surface Finish: Glossy translucent
• Shore Hardness: 95A
Best for:
• Clear phone case bumpers
• Soft light pipes and diffusers
• Translucent protective covers
• Flexible see-through gaskets and seals
Not ideal for:
• Maximum-clarity optical parts
• Bowden-tube setups
• Rigid structural parts
Print settings
| Nozzle temperature | 220-235°C (slightly higher for clarity) |
|---|---|
| Bed temperature | 40-50°C |
| Print speed | 20-30 mm/s |
| Cooling fan | 30-60% (less = clearer) |
| Retraction | 0.5-1mm |
| Flow rate | 100-105% |
| Layer height | 0.16-0.20mm for best clarity |
For best clarity: slow speeds, slightly hotter nozzle, fewer perimeters, low or zero infill. Same printer requirements as standard 95A — direct drive strongly recommended.